PLEASE NOTE: THIS PRODUCT IS NOT MEANT TO BE OPAQUE. COLORS SUCH AS GREYSTONE AND BLACK ARE MORE TRANSLUCENT. THIS PRODUCT IS MOST USEFUL AS A TOPCOAT OVER FUSION'S DARK PAINT COLORS AND MAY BE USED IN COMBINATION WITH FUSION'S STAIN & FINISHING OIL. STAIN & FINISHING OIL SHOULD BE APPLIED FIRST AND ALLOWED TO DRY. TOPCOAT WITH PATINA (CLEAR) OR USE ONE OF THE TINTED GEL STAINS TO ADD DEPTH.
This one-step brush on stain and tough protective coating provides a durable, rich, satin finish - perfect for heavily used interior surfaces. It is ideal for areas that are washed frequently - table tops, bathroom vanities, even floors! This hard-wearing, maintenance-free interior finish enhances the beauty of natural wood while resisting water, food stains, alcohol, grease, and detergents.
How to apply: Stir thoroughly before applying. Do not shake - this introduces bubbles. There is no need to strip or completely sand your surface - just ensure it is clean and dry.
Apply a thin coat using a brush or microfiber roller (not foam) in a dust-free area.
Let the gel stain dry for about 4 hours between coats. The surface can be used after 24 hours, but the gel stain takes 5 days to fully cure. Gel stain can be cleaned up using mineral spirits. If using on new, raw wood, the first coat should be thinned by using 1 part mineral spirits and 4 parts gel stain.
One 946 mL (1 quart) jar covers approximately 120 square feet.
Available in Patina (Clear) and 3 different colours: Black, Double Espresso & Greystone.